MSR Universal Tent Footprint - Protect Your Tent Floor

MSR Universal Tent Footprint - Simple Protection That Extends Your Tent's Life

A footprint is one of those things you don't think about until you need it. The MSR Universal Footprint does exactly what it should - keeps your tent floor clean, dry, and protected from the rough stuff underneath. Whether you're camping on sharp gravel, abrasive rock, or damp ground, this groundsheet sits between your tent and whatever nature throws at it.

Available in seven sizes to fit MSR tents from solo shelters through to four-person family tents, the Universal Footprint is cut to match your tent's floor dimensions. It's not fancy, but it works. Pitch it first, set your tent on top, and you've added a protective barrier that helps your tent last longer.

Why Use a Tent Footprint?

Your tent floor takes a beating. Rocks, sticks, pine cones, and rough ground all contribute to wear over time. A footprint absorbs that punishment instead of your tent. It also provides an extra moisture barrier when you're camping on damp ground, and makes packing up easier since your tent floor stays cleaner.

Think of it as cheap insurance for your tent. Replacing a footprint costs a lot less than replacing a tent floor or buying a new tent altogether.

Key Features

• Protects tent floor from abrasion, punctures, and wear
• Adds extra moisture barrier on damp or wet ground
• Keeps tent floor cleaner for easier pack-up
• Available in 7 sizes to fit 1-4 person MSR tents
• Lightweight - won't add much to your pack weight
• Durable construction for long-term use
• Easy to clean and maintain

Available Sizes

Choose the size that matches your tent capacity:

Which Size Do I Need?

Match the footprint size to your tent's capacity and floor dimensions. If you have an MSR tent, check your tent's specifications and choose the corresponding footprint size. The "Regular" sizes work for most standard tents, while "Large" sizes accommodate tents with wider floor plans.

Not sure? Measure your tent floor and compare it to the dimensions above. The footprint should be slightly smaller than your tent floor to prevent water pooling between the footprint and tent.

How to Use Your Footprint

Using a footprint is straightforward. Clear your campsite of sharp objects, lay the footprint flat on the ground, then pitch your tent on top. Make sure the footprint doesn't extend beyond your tent floor - if it does, fold the edges under to prevent rain from collecting between the footprint and tent.

When you pack up, shake off any dirt or debris, let it dry if it's wet, then fold or roll it separately from your tent. This keeps your tent cleaner and makes the next setup easier.

Maintenance and Care

Footprints are tough, but a bit of care helps them last. After each trip, shake off dirt and let the footprint dry completely before storing. If it's muddy, rinse it with water and hang it to dry. Store it loosely rather than tightly compressed to maintain the fabric's integrity.

Check occasionally for holes or tears. Small punctures can be repaired with tent repair tape to extend the footprint's life.

Compatible Tents

The MSR Universal Footprint is designed to work with MSR tents, including:

• MSR Access series (1, 2, and 3 person models)
• MSR Hubba series
• MSR Elixir series
• MSR FreeLite series
• MSR Front Range (4 person)
• Other MSR tents with matching floor dimensions

Check your tent's floor dimensions to ensure proper fit.

Why Buy from Outdoor Action?

We stock genuine MSR products with manufacturer warranty. Fast shipping across Australia and New Zealand means you'll have your footprint ready for your next trip. If you're not sure which size you need, get in touch and we'll help you sort it out.

Note: Footprint sold separately from tents. Country of origin: Imported.